From: VacuumFamily.COM News Centre Add Time: 2016-5-12 10:19:00
Vacuum sintering furnace, Powder Injection Molding (Powder Injection Molding, PIM) by Metal Powder Injection Molding (Metal Injection Molding, the MIM) and ceramics Powder Injection Molding (Ceramics Injection Molding, CIM) in two parts, it is a kind of new metal, ceramic components, preparation technology, it is the plastic Injection Molding technology is introduced into the field of powder metallurgy and form a kind of brand-new parts processing technology. The MIM is the basic process steps of: firstly, to meet the requirements of the MIM metal powder and the binder, then use the appropriate method under a certain temperature to mix powder and caking agent into uniform feeding, the granulating again after injection molding, obtain billet , then after degreasing process sintering densification into finished products . The characteristics of powder injection molding technology.
What is the vacuum
Vacuum means that a given gas pressure within the space of less than the area of a standard atmospheric pressure gas state.
Vacuum is rarefied gas environment. Compared with the atmosphere it has a number of advantages, such as gas thin, less oxygen, clean environment...
Rotary vane vacuum pump troubleshooting methods
Operation of rotary vane vacuum pump, if done incorrectly, often malfunction, such as rotary vane vacuum pump vacuum reduction, fuel injection, smoke, oil seal leakage, noise, etc., and vacuum pump oil emulsification phenomenon . In case thi...
Vacuum pump in a variety of different job categories effect have?
Vacuum pumps work in a variety of different play areas in effect summed up in the following areas:
1, main pump: the so-called main pump is a vacuum system is evacuated container is directly evacuated to the vacuum pump ...